Indus Corporation

Honeywell board mounted Humidity Sensor IC HIH-4000 Series are designed specifically for high volume OEM (Original Equipment Manufacturer) users.

Specifications:

• Operating Temperature: -40ºC to 85ºC [-40°F to 185°F]
• Operating Humidity: 0% to 100% RH
• Supply Voltage: 4 to 5.8VDC
• Supply Current: 500µA
• Output Signal: Analog Voltage
• Hysteres: ±3 %RH
• Item Code: HIH-4000

Additional Information:

• Item Code: HIH4000
• Delivery Time: Ready

MIPCG1XX010BACHX Honeywell Pressure Transducers offers a heavy duty and media-isolated pressure transducer in a compact, stainless steel construction for use with a wide range of media including aggressive fluids and water. The Honeywell MIPCG1XX010BACHX Pressure Transducers provides a cost-competitive solution for wide-ranging potential applications in tough environments.

 

VALUE TO CUSTOMERS

1.  Total Error Band (TEB) ±0.75 %FSS (Full Scale Span) from -40°C to 125°C for ratiometric output: as a result Provides true measurement performance over the compensated temperature range; small error promotes system uptime and efficiency
2. 4 mA to 20 mA output: Supports transmission of output signals over longer distances
3. Operates reliably in the presence of electromagnetic fields for instance wireless signals and RF communication and electrical devices as for EMC performance
4.  Hermetically welded design: Supports almost any media without the use of an internal seal. The sensors are designed to be used in harsh environments which see aggressive media.

 

DIFFERENTIATION

1. Diagnostics: Beneficial in applications where the sensor functionality and the need to know internal or external failure modes is critical.
2. Great customer value: Multiple configuration possibilities provide flexibility of use in the application with no up front NRE or tooling charges.
3. Durable: Provides the tough environmental capabilities needed, including long-term stability, insulation resistance and dielectric strength, external freeze-thaw resistance for the Metri-Pack 150 versions and EMC performance

 

FEATURES

1. Rugged, stainless steel construction
2.  Ratiometric output: 0.5 Vdc to 4.5 Vdc
3.  Current output: 4 mA to 20 mA
4.  Operating temperature: -40°C to 125°C
5.  Total Error Band: ±0.75 %FSS to ±1.0 %FSS (-40°C to 125°C) for voltage output
6.  Industry-leading accuracy: ±0.15 %FSS BFSL for voltage output
7.  Long term stability: ±0.25 %FSS
8. Radiated immunity: 100 V/m
9.  Drinking water approval: NSF/ANSI/CAN 61
10. CE, UKCA, RoHS, REACH compliant
11.  Mis-wiring protection

POTENTIAL APPLICATIONS

• Industrial: pumps- water, hydraulic fluids
  compressors- compressed air
  process- food, beverage, oil, gas, steam
• HVAC/R: refrigerants (butane, propane, ammonia, CO2, R134A, R407C, R410A, R448A/Solstice® N40, R32 and R1234ze, R1234yf, glycol + water
• Transportation: gasoline, diesel fuel, engine oil, brake fluid, coolants, CNG
• Medical: O2, N2, CO2, N2O, air

MIPCG1XX010BSCHX Honeywell Pressure Transducers offers a heavy duty and media-isolated pressure transducer in a compact, stainless steel construction for use with a wide range of media including aggressive fluids and water. The Honeywell MIPCG1XX010BSCHX Pressure Transducers provides a cost-competitive solution for wide-ranging potential applications in tough environments.

 

VALUE TO CUSTOMERS

1.  Total Error Band (TEB) ±0.75 %FSS (Full Scale Span) from -40°C to 125°C for ratiometric output: as a result Provides true measurement performance over the compensated temperature range; small error promotes system uptime and efficiency
2. 4 mA to 20 mA output: Supports transmission of output signals over longer distances
3. Operates reliably in the presence of electromagnetic fields for instance wireless signals and RF communication and electrical devices as for EMC performance
4.  Hermetically welded design: Supports almost any media without the use of an internal seal. The sensors are designed to be used in harsh environments which see aggressive media.

 

DIFFERENTIATION

1. Diagnostics: Beneficial in applications where the sensor functionality and the need to know internal or external failure modes is critical.
2. Great customer value: Multiple configuration possibilities provide flexibility of use in the application with no up front NRE or tooling charges.
3. Durable: Provides the tough environmental capabilities needed, including long-term stability, insulation resistance and dielectric strength, external freeze-thaw resistance for the Metri-Pack 150 versions and EMC performance

 

FEATURES

1. Rugged, stainless steel construction
2.  Ratiometric output: 0.5 Vdc to 4.5 Vdc
3.  Current output: 4 mA to 20 mA
4.  Operating temperature: -40°C to 125°C
5.  Total Error Band: ±0.75 %FSS to ±1.0 %FSS (-40°C to 125°C) for voltage output
6.  Industry-leading accuracy: ±0.15 %FSS BFSL for voltage output
7.  Long term stability: ±0.25 %FSS
8. Radiated immunity: 100 V/m
9.  Drinking water approval: NSF/ANSI/CAN 61
10. CE, UKCA, RoHS, REACH compliant
11.  Mis-wiring protection

POTENTIAL APPLICATIONS

• Industrial: pumps- water, hydraulic fluids
  compressors- compressed air
  process- food, beverage, oil, gas, steam
• HVAC/R: refrigerants (butane, propane, ammonia, CO2, R134A, R407C, R410A, R448A/Solstice® N40, R32 and R1234ze, R1234yf, glycol + water
• Transportation: gasoline, diesel fuel, engine oil, brake fluid, coolants, CNG
• Medical: O2, N2, CO2, N2O, air

HLPB04X Honeywell Pressure Transmitter

The HLP is used to measure positive, negative or differential pressure. The piezoresistive sensor is ideal for monitoring the pressure of air or other clean inert gas. Typical HVAC applications include monitoring of filter differential pressure or VAV applications. An integrated static pressure probe provides ease of installation for duct mounting. Several accessories are available. A weatherproof polycarbonate enclosure is provided for electrical connections and ease of installation.

 

APPLICATIONS
The HLP low-pressure transmitter is designed for use with electronic controllers in domestic or commercial heating and cooling systems.

Honeywell MIPAG1XX006BSCHX Pressure Transducers offers a heavy duty and media-isolated pressure transducer in a compact, stainless steel construction for use with a wide range of media including aggressive fluids and water. The Honeywell MIPAG1XX006BSCHX Pressure Transducers provides a cost-competitive solution for wide-ranging potential applications in tough environments.

 

VALUE TO CUSTOMERS

1.  Total Error Band (TEB) ±0.75 %FSS (Full Scale Span) from -40°C to 125°C for ratiometric output: as a result Provides true measurement performance over the compensated temperature range; small error promotes system uptime and efficiency
2. 4 mA to 20 mA output: Supports transmission of output signals over longer distances
3. Operates reliably in the presence of electromagnetic fields for instance wireless signals and RF communication and electrical devices as for EMC performance
4.  Hermetically welded design: Supports almost any media without the use of an internal seal. The sensors are designed to be used in harsh environments which see aggressive media.

 

DIFFERENTIATION

1. Diagnostics: Beneficial in applications where the sensor functionality and the need to know internal or external failure modes is critical.
2. Great customer value: Multiple configuration possibilities provide flexibility of use in the application with no up front NRE or tooling charges.
3. Durable: Provides the tough environmental capabilities needed, including long-term stability, insulation resistance and dielectric strength, external freeze-thaw resistance for the Metri-Pack 150 versions and EMC performance

 

FEATURES

1. Rugged, stainless steel construction
2.  Ratiometric output: 0.5 Vdc to 4.5 Vdc
3.  Current output: 4 mA to 20 mA
4.  Operating temperature: -40°C to 125°C
5.  Total Error Band: ±0.75 %FSS to ±1.0 %FSS (-40°C to 125°C) for voltage output
6.  Industry-leading accuracy: ±0.15 %FSS BFSL for voltage output
7.  Long term stability: ±0.25 %FSS
8. Radiated immunity: 100 V/m
9.  Drinking water approval: NSF/ANSI/CAN 61
10. CE, UKCA, RoHS, REACH compliant
11.  Mis-wiring protection

POTENTIAL APPLICATIONS

• Industrial: pumps- water, hydraulic fluids
  compressors- compressed air
  process- food, beverage, oil, gas, steam
• HVAC/R: refrigerants (butane, propane, ammonia, CO2, R134A, R407C, R410A, R448A/Solstice® N40, R32 and R1234ze, R1234yf, glycol + water
• Transportation: gasoline, diesel fuel, engine oil, brake fluid, coolants, CNG
• Medical: O2, N2, CO2, N2O, air

Honeywell Duct type Humidity & Temperature Transmitter

Specifications:

• Rh Accuracy: ±3%
• Temperature Range: 0-70ºC
• Temperature Output: 4-20mA/0-10V
• RH Range: 0 to 100%
• RH Output: 4-20mA / 0-10VDC
• Power Supply: 24VDC/AC
• Item Code: H7080B3273

Additional Information:

• Delivery Time: Ready
• Packaging Details: 1 No Box

FEATURES
• Laser-based light scattering particle sensing Concentration range: 0 g/m3 to 1,000 g/m3
• Air inlet & outlet on same side
• Fully calibrated
• Metal casting
• 4 channel direct output to measure PM 1.0, PM 2.5, PM 4.0 & PM 10
• Multiple digital outputs though UART, 12C, & PWM

• Proven EMC performance, and superior accuracy of ±15%-20% for all PM values
• Lowest current consumption of 50 mA
• Self calibration technology to overcome sensor drift incase of dust accumulation
• Ultra sleek design with dimensions of 49 x 31.5 x 10.8 mm

 

POTENTIAL APPLICATIONS
• HVAC (Commercial & Residential)
• Indoor air quality monitors
• Handheld air quality monitors
• Air purifiers (Commercial & Residential)
• Automotive cabin air purifiers

Honeywell BW Clip Series of single-gas detectors provides up to three years maintenance-free operation: Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. Honeywell BW Clip Series means great reliability and no downtime.Features

1. Maintenance-free: no sensor or battery changes necessary
2. Compact, lightweight design with one-button operation
3. Designed for a range of harsh environments and extreme temperatures
4. Hibernation mode with case accessory or IntelliDoX
5. Automated self-test of battery, sensor and electronics
6. Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
7. Automatic logging of the 35 most recent gas events and bump test results
8. Affordable, with low cost of ownership
9. Device Management with Honeywell Safety Suite

Honeywell ToxiRAE Pro Series is the world’s first wireless personal monitor for toxic gases and oxygen1. Can detect a broad range of gases—from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and formaldehyde2. The ToxiRAE Pro provides safety professionals wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response. Honeywell ToxiRAE Pro Series is intelligent interchangeable sensors store calibration data, which allows users to monitor for one gas one day and another gas the next, by simply swapping the sensors in the ToxiRAE Pro3.

Features

1. Wireless access to real-time instrument readings and alarm status from any location
2. Unmistakable five-way local and remote wireless notification of alarm conditions
3. Intelligent sensors store calibration data, so they can be swapped in the field
4. Most electrochemical sensors are shared with MultiRAE family instruments
5. Largest display in its class
6. Continuous datalogging
7. Easy to use
8. Reliable, rugged, and intrinsically safe
9. Device Management with Honeywell Safety Suite

Honeywell MIPAG1XX001BACHX Pressure Transducers offers a heavy duty and media-isolated pressure transducer in a compact, stainless steel construction for use with a wide range of media including aggressive fluids and water. The Honeywell MIPAG1XX001BACHX Pressure Transducers provides a cost-competitive solution for wide-ranging potential applications in tough environments.

 

VALUE TO CUSTOMERS

1.  Total Error Band (TEB) ±0.75 %FSS (Full Scale Span) from -40°C to 125°C for ratiometric output: as a result Provides true measurement performance over the compensated temperature range; small error promotes system uptime and efficiency
2. 4 mA to 20 mA output: Supports transmission of output signals over longer distances
3. Operates reliably in the presence of electromagnetic fields for instance wireless signals and RF communication and electrical devices as for EMC performance
4.  Hermetically welded design: Supports almost any media without the use of an internal seal. The sensors are designed to be used in harsh environments which see aggressive media.

Honeywell MIPAG1XX001BACHX Pressure Transducers offers a heavy duty and media-isolated pressure transducer in a compact, stainless steel construction for use with a wide range of media including aggressive fluids and water. The Honeywell MIPAG1XX001BACHX Pressure Transducers provides a cost-competitive solution for wide-ranging potential applications in tough environments.

 

VALUE TO CUSTOMERS

1.  Total Error Band (TEB) ±0.75 %FSS (Full Scale Span) from -40°C to 125°C for ratiometric output: as a result Provides true measurement performance over the compensated temperature range; small error promotes system uptime and efficiency
2. 4 mA to 20 mA output: Supports transmission of output signals over longer distances
3. Operates reliably in the presence of electromagnetic fields for instance wireless signals and RF communication and electrical devices as for EMC performance
4.  Hermetically welded design: Supports almost any media without the use of an internal seal. The sensors are designed to be used in harsh environments which see aggressive media.

 

DIFFERENTIATION

1. Diagnostics: Beneficial in applications where the sensor functionality and the need to know internal or external failure modes is critical.
2. Great customer value: Multiple configuration possibilities provide flexibility of use in the application with no up front NRE or tooling charges.
3. Durable: Provides the tough environmental capabilities needed, including long-term stability, insulation resistance and dielectric strength, external freeze-thaw resistance for the Metri-Pack 150 versions and EMC performance

P7620C0025A Honeywell cell differential pressure transmitters and transducers have been designed for most industrial pressure measurement applications at high quality performance and precision accuracy requirement including fluids and gases. The ceramic cell and metallic wetted parts can be compatible with majority of aggressive process fluids. The output signal of the sensing bridge is in converted to be a standardized current or voltage signal through surface mount technology circuit board. This high level signal output with very low noise system is packaged in a rugged stainless steel housing to resist the harsh and extreme environment conditions. Each transmitter is inspected and calibrated to ensure its 100% quality.

FEATURES

1. Accuracy 0.5% F.S.
2. Fluid and Gas applications
3. Temperature Compensated
4. Built in Amplifier
5. Shock and Vibration Resistance
6. Zero and Span Adjustments
7. False System Shutdown Prevention

APPLICATIONS

1. Industrial OEM equipments
2. Compressor controls
3. Pneumatic systems
4. Pump applications
5. HVAC systems
6. Liquid level measurements
7. Energy and water managements

Honeywell BW Solo Series has everything you expect — plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

1. The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
2. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards.
3. The first single-gas detector with the 1-Series sensor for CO, H2S, O2 and CO2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
4. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software to maintain and monitor your entire fleet from practically anywhere.

Features

1. Option to activate IntelliFlash™ or non-compliance flash
2. Honeywell BW Solo Series is Ability to assign detectors to workers and locations
3. Easy-to-read display for multiple languages
4. Data logging with rolling 24-hour peak reading

BW Max XT II Honeywell Gas Detector is the smart, simple, economical way to compliance. Workers feel safe and incidents are minimized so everyone will be able to do more. That means savings realized from business continuity and productivity. With the addition of IntelliFlash™, this multi-gas detector offers continuous visual confirmation of detector operation and compliance.

1. Minimize costs and training with one-button operation
2. Honeywell Max XT II is More accurate sampling results with Smart Sample pump technology
3. Compact, comfortable and field tough

Features of BW Max XT II

1. Integrated sampling pump with reliable diaphragm technology
2. Best in class block detection with semi-conductor pressure sensor
3. Multi-language support in English, French, German, Spanish and Portuguese
4. • Conveniently manage your detector with Fleet Manager II
5. Equipped with standard datalogging and event logging
6. Continuous LCD shows real-time gas concentrations
7. Continuous visual compliance with IntelliFlash™
8. Compact and lightweight design makes it comfortable to wear
9. Water-resistant
10. Simple automatic calibration procedure; compatible with Micro Dock II automatic test and calibration station
11. Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start-up
12. Bright wide-angled visual alarm bars
13. Built-in concussion-proof boot
14. Compatible with Honeywell BW™ Connect for real time monitoring