Indus Corporation

We are authorised distributors of Honeywell Products and have stock of Honeywell Damper Actuator CN7234A2008 at best prices. These direct-coupled damper actuators provide modulating control for: • Air dampers • VAV units • Air handlers • Ventilation flaps • Louvers, and • Reliable control for air damper applications with up to 4.6m2 / 50 sq.ft. (20 Nm / 177 lb-in) or 7.8m2 / 85 sq. ft. (34 Nm / 300 lb-in)(seal- less damper blades; air friction-dependent)

We are authorised distributors of Honeywell Products and have stock of Honeywell EM-0150 Motorized & Actuated Butterfly Valve at best prices.The BSBFW Actuated Wafer Type Butterfly Valves are suitable for heating and cooling applications, equipped with standard On-Off control quarter-turn electric actuator. The BSBFW series can also provide feedback output signal:Dry contact for On-Off version

We are authorised distributors of Honeywell Products and have stock of Honeywell EM-0400 Motorized & Actuated Butterfly Valve at best prices.The BSBFW Actuated Wafer Type Butterfly Valves are suitable for heating and cooling applications, equipped with standard On-Off control quarter-turn electric actuator. The BSBFW series can also provide feedback output signal:Dry contact for On-Off version.

We are authorised distributors of Honeywell Products and keep stock of MVN7234 Ball Valve Actuator at best prices which is designed to be used with VBA16P and VBA16F Series Ball Valves. Mounting bracket is included and pre-installed for easy field installation. It Can connect to external auxiliary switch and has Overload protection

We are authorised distributors of Honeywell Products and have stock of Honeywell EM-0090 Motorized & Actuated Butterfly Valve at best prices.The BSBFW Actuated Wafer Type Butterfly Valves are suitable for heating and cooling applications, equipped with standard On-Off control quarter-turn electric actuator. The BSBFW series can also provide feedback output signal:Dry contact for On-Off version

The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.

 

FEATURES
• 30 lb-in. (3.4 N•m) or 80 lb-in. (9 N•m) minimum driving torque at 350°F (176°C).
• Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation.
• Integral spring return ensures level of return torque.
• Fifteen-second spring return timing.
• No special cycling required during long-term holding. (See Operation section.)
• No audible noise during holding.
• Patent pending design eliminates need for limit switches to reduce power consumption.
• Models available for 24, 120, and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Die-cast aluminum housing.
• Housing design allows flush mounting to damper.
• Designed to operate reliably in smoke control systems requiring Underwriter’s Laboratories Inc. UL555S ratings up to 350°F.
• Models available with SPST position-indicating switches (7°, 85° stroke).

The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.

 

FEATURES
• 30 lb-in. (3.4 N•m) or 80 lb-in. (9 N•m) minimum driving torque at 350°F (176°C).
• Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation.
• Integral spring return ensures level of return torque.
• Fifteen-second spring return timing.
• No special cycling required during long-term holding. (See Operation section.)
• No audible noise during holding.
• Patent pending design eliminates need for limit switches to reduce power consumption.
• Models available for 24, 120, and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Die-cast aluminum housing.
• Housing design allows flush mounting to damper.
• Designed to operate reliably in smoke control systems requiring Underwriter’s Laboratories Inc. UL555S ratings up to 350°F.
• Models available with SPST position-indicating switches (7°, 85° stroke).

Related products

This non-spring return direct-coupled damper actuator provides floating and two-position control for:
• air dampers,
• VAV units,
• air handlers,
• ventilation flaps,
• louvers, and
• reliable control for air damper applications with up to 10sq ft / 44 lb-in. (5 Nm) and 20 sq ft / 88 lb-in. (10 Nm) (seal- less damper blades; air friction-dependent).

FEATURES
• Declutch for manual adjustment
• Adjustable mechanical end limits
• Removable access cover for direct wiring
• Mountable in any orientation
• Rotation direction and service/OFF switch

10Nm, 230Vac, floating control, non-spring
return, no feedback and without aux. Switch

The MS4604F1210/B  Honeywell Damper Actuator, MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). Honeywell MS4604F1010/B Damper Actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.

The MS4620F; MS8120F Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for on/off damper control. The actuator accepts an on/off signal from a single-pole, single-throw (spst) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation. Designed to operate reliably in smoke control systems.

• Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation.
• No special cycling required during long-term holding.
• Integral spring return ensures level of return torque.
• Stainless steel internal spring.
• Fifteen-second spring return timing.
• No audible noise during holding.
• Patent pending design eliminates need for limit switches to reduce power consumption.
• Models available for 24 and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Housing design allows flush mounting to damper.
• Self-centering shaft adapter (SCSA), patent pending.
• Designed to operate reliably in smoke control systems.

The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.

We are authorised distributors of Honeywell Products and keep stock of MVN7505 Ball Valve Actuator at best prices which is designed to be used with VBA16P and VBA16F Series Ball Valves. Mounting bracket is included and pre-installed for easy field installation. It Can connect to external auxiliary switch and has Overload protection

The ML7421A / ML7421B actuators are designed for modulating control, accepting 0(2)…10v or 4…20mA input signal, and providing feedback signal 2…10 Vdc only. They operate Honeywell’s standard valves in heating, ventilation, and air conditioning (HVAC) applications.

      Features:-

•  Easy and quick installation
•  No separate linkage and adjustments required
•  Low power consumption and maintenance-free
•  Self-adaption function
•  Force-limiting end stops
•  Manual operation knob
•  0(2)~10 Vdc input and 2~10 Vdc position feedback
•  Direct/ Reverse action adjustable
•  Selectable stroke position when signal failure
•  Corrosion-resistant design

We are authorised distributors of Honeywell Products and keep stock of MVN7220 Ball Valve Actuator at best prices which is designed to be used with VBA16P and VBA16F Series Ball Valves. Mounting bracket is included and pre-installed for easy field installation. It Can connect to external auxiliary switch and has Overload protection

We are authorised distributors of Honeywell Products and have stock of Honeywell MLP71MAA Actuator at best prices.Honeywell pressure independent control valve (PICV) is used in heating and cooling systems in applications with Air Handling Units, Fan Coil Units, chilled ceilings, zone control or other terminal unit applications. Honeywell VPI series provides modulating control with full authority regardless of any fluctuations in the differential pressure of the system. Honeywell VPI series combines an externally adjustable automatic balancing valve, a differential pressure control valve and a full authority modulating control valve. Honeywell VPI series makes it simple to achieve 100% control of the water flow in the building, while creating high comfort and energy savings at the same time. An additional benefit is that no balancing is required if further stages are added to the system, or if the dimensioned capacity is changed. It is Energy saving due to optimal control, lower flow and pump pressure. Maximized ΔT due to faster response and increased system stability. 

We are authorised distributor of Honeywell products and keep in stock HONEYWELL ROTARY ACTUATOR OM-1-E at best prices. The OM series is equipped with standard On-Off or modulating (4~20mA, 1~5V, or 0(2) ~10V select by DIP-switch) control quarter-turn electric actuator and can also provide feedback output signal: Dry contact for On-Off version; 0~5V, 0~10V, 4~20mA (selected by DIP- switch) for modulating version, Auxiliary Switch is optional.

The MS4120F, MS4620F, MS8120F, S2024-F, and S20230-F Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for on/off damper control. The actuator accepts an on/off signal from a single-pole, single-throw (spst) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation. Designed to operate reliably in smoke control systems requiring Underwriter’s Laboratories Inc. UL555S ratings up to 350°F, if applicable.