Mumbai, Maharashtra
GST No. 27AZMPM0516E1ZJ
Call 08046033631 87% Response Rate
Minimum Order Quantity: 1 Piece
Product Brochure
Usage | Sensing Temp & RH |
Voltage | 24V |
Accuracy | 4% |
Output Type | 4 mA to 20 mA |
Model | SCTHWA43SDS |
Type | SCT Series Humidity and Temperature Wall Mount Transducers With LCD Display |
Usage/Application | Pharma |
Color | Silver |
Brand | Honeywell |
Humidity Accuracy | 4 %RH |
Temperature Accuracy | 0.3 DegreeC |
Temperature Range | -5 DegreeC to 55 DegreeC |
Cover Trim Color | Silver |
Housing material | Plastic (PC+ABS) |
Sealing | IP30 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Honeywell |
Type | Humidity & Temperature Sensor |
Humidity Accuracy | 2% RH |
Temperature Range | -5 DegreeC to 55 DegreeC |
Temperature Accuracy | 0.3 DegreeC |
Model No. | SCTHWA23SDS |
Mounting Type | Wall Mount |
Output Type | 4 mA to 20 mA |
Maximum Operating Supply Voltage | 24V |
Cover Trim Color | Silver |
Housing material | Plastic (PC+ABS) |
Sealing | IP30 |
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Honeywell |
Part Number | MIPCG1XX010BSCHX |
Pressure Range | 10 bar |
Electrical Connector Type | DIN-C, Standard (EN175301-803C) |
Pressure Port Type | G1/4 A-G3 (ISO 1179-3) |
Current | 4 mA to 20 mA |
Supply voltage (Vs) | 8 Vdc to 30 Vdc1 |
Current consumption | 6.5 mA +-1 mA |
Over/reverse voltage | +-35 Vdc |
Total Error Band | +-1.0 %FSS (-20deg C to 85deg C) +-2.0 %FSS (-40deg C to 125deg C) |
Operating temperature range | -40deg C to 125deg C |
Accuracy BFSL3 | +-0.25 %FSS |
Long term stability (1000 hr, 25deg C) | +-0.25 %FSS |
Typical output resolution | 0.05 % Full Scale Pressure |
Typical response time | 2 ms |
Startup time | 7 ms |
Life | >10 million full scale pressure cycles |
Shock | 100 G per MIL-STD-202, Method 213, Cond. C at 25deg C |
Vibration | 20 G sweep, 10 Hz to 2000 Hz at 25deg C |
Ingress protection: Metri-Pack 150 versions | IP65, IP67 |
Wetted materials: port diaphragm external seal for ports | stainless steel 304L stainless steel 316L nitrile -30deg C to 100deg C |
Electrical connector material | PBT 30 %GF (UL V-0) |
Cable material (jacket and insulation) | TPE (Thermoplastic Elastomer) flame retardant-type cable is FT1 rated per CSA AWM-I-A/B-II-A/B speci |
MIPCG1XX010BSCHX Honeywell Pressure Transducers offers a heavy duty and media-isolated pressure transducer in a compact, stainless steel construction for use with a wide range of media including aggressive fluids and water. The Honeywell MIPCG1XX010BSCHX Pressure Transducers provides a cost-competitive solution for wide-ranging potential applications in tough environments.
VALUE TO CUSTOMERS
DIFFERENTIATION
FEATURES
View Complete details
Product Brochure
Brand | Honeywell |
Part Number | SCTHWA23SNS |
Mounting Type | Wall Mount |
Accuracy | 2% |
Maximum Operating Supply Voltage | 24V |
Output Type | 4-20 mA |
Humidity Accuracy | 2 %RH |
Temperature Accuracy | 0.3 DegreeC |
Temperature Range | -5 DegreeC to 55 DegreeC |
Cover Trim Color | Silver |
Housing material | Plastic (PC+ABS) |
Sealing | IP30 |
Additional Information:
View Complete details
Product Brochure
Minimum Order Quantity | 1 Number |
Brand | Pepperl + Fuchs |
Model Name/Number | NBB15-30GM50-E2 |
Connection Type | cable PUR , 2 m |
Output Type | PNP |
Switching Frequency | 0 ... 600 Hz |
Installation Type | flush |
Rated Distance | 15 mm |
Ambient Temperature | -40 ... 85 DegreeC |
Housing | brass, nickel-plated |
Reverse polarity protection | reverse polarity protected |
Short circuit protection | pulsing |
Weight | 190 g |
Operating voltage | 5 ... 60 V |
Degree of Protection | IP68 / IP69K |
View Complete details
Minimum Order Quantity: 01 Number
Product Brochure
Connection Type | 2 m fixed cable |
Brand | Pepperl + Fuchs |
Material | Housing: PC (Polycarbonate) Optical face :PMMA |
Light source | LED |
Light type | Modulated visible red light |
Detection range | 10 ... 100 mm |
Additional Information:
View Complete details
Product Brochure
Minimum Order Quantity | 1 Piece |
Brand | Honeywell |
Part Number | MIPAG1XX004BACHX |
Pressure Range | 4 bar |
Electrical Connector Type | Metri-Pack 150, Standard (UL V-0) |
Pressure Port Type | G1/4 A-G3 (ISO 1179-3) |
Current | 4 mA to 20 mA |
Supply voltage (Vs) | 8 Vdc to 30 Vdc1 |
Current consumption | 6.5 mA +-1 mA |
Over/reverse voltage | +-35 Vdc |
Total Error Band | +-1.0 %FSS (-20 DegreeC to 85 DegreeC) +-2.0 %FSS (-40 DegreeC to 125 DegreeC) |
Operating temperature range | -40 DegreeC to 125 DegreeC |
Accuracy BFSL3 | +-0.25 %FSS |
Typical output resolution | 0.05 % Full Scale Pressure |
Typical response time | 2 ms |
Startup time | 7 ms |
Life | >10 million full scale pressure cycles |
Shock | 100 G per MIL-STD-202, Method 213, Cond. C at 25 deg C |
Vibration | 20 G sweep, 10 Hz to 2000 Hz at 25 Deg C |
Ingress protection: Metri-Pack 150 versions | IP65, IP67 |
Electrical connector material | PBT 30 %GF (UL V-0) |
Cable material (jacket and insulation) | TPE (Thermoplastic Elastomer) flame retardant-type cable is FT1 rated per CSA AWM-I-A/B-II-A/B speci |
Honeywell MIPAG1XX004BACHX Pressure Transducers offers a heavy duty and media-isolated pressure transducer in a compact, stainless steel construction for use with a wide range of media including aggressive fluids and water. The Honeywell MIPAG1XX004BACHXPressure Transducers provides a cost-competitive solution for wide-ranging potential applications in tough environments.
VALUE TO CUSTOMERS
DIFFERENTIATION
FEATURES
View Complete details
Product Brochure
Minimum Order Quantity | 1 Piece |
Brand | Autonics |
Part Number | PSAN Series |
Response Time | Selectable 2.5ms, 5ms, 100ms, 500ms, 1000ms |
Operating Temperature | -10 to 50 Deg C |
IP Protection Class | IP40 |
Applied Vapour | Pneumatic- Air & Non-corrosive gas |
Applied Fluid | Pneumatic- Air, Non-corrosive gas & fluid that will not corrode |
Power supply | 12-24VDC +-10% |
Current consumption | Max. 50mA |
Control Output | NPN or PNP open collector output |
Hysteresis | Min. display range |
Repeat Error | +-0.2% F.S. +-Min. display range |
Short circuit protection | Built In |
Display Digit | 4 1/2 Digit |
Display Method | 7 Segment LED display |
Display Accuracy | 0 to 50 Deg C |
Dielectric Strength | 1000VAC 50/60 HZ for 1 Minute |
Insulation Resistance | Min 50M Ohm |
Humidity | 30 to 80% Rh |
Features:
View Complete details
Product Brochure
Minimum Order Quantity | 1 Piece |
Sensing Type | 0.1 ~ 7m |
Power Supply | 12-24 Vdc +- |
Protection circuit | Reverse Polarity Protection |
Current Consumption | Emitter: Max 80mA, Receiver: Max 80mA |
Operation Mode | Light ON only |
Response Time | Max 12ms |
Light Source | Infrared LED |
Ambient Temperature | -10 ~ +55 Deg C |
Storage Temperature | -20 ~ +60 Deg C |
Ambient Humidity | -35 ~ +85 %Rh |
Storage Humidity | -35 ~ +85 %Rh |
Dielectric Strength | 1000 VAC 50/60 Hz for 1 minute |
Vibration | 1.5mm amplitude at frequency of 10 ~ 55Hz in each of X, Y, Z, directions for 2 hours |
Protection | IP65 |
Weight | 1.4 Kg |
View Complete details
Product Brochure
Brand | Honeywell |
Supply Voltage | 2.7 to 6.5 Vdc |
Supply Current | 10.0mA Max. |
Operating Temperature | -40 to 100 DegreeC |
Storage Temperature | -55 to 165 DegreeC |
Model no. | SS49E |
Description :
The SS39ET/SS49E/SS59ET Series Low-cost Linear Hall-effect sensors are small, versatile devices that are operated by the magnetic field from a permanent magnet or an electromagnet. The linear sourcing output voltage is set by the supply voltage and varies in proportion to the strength of the magnetic field. Low voltage capability as low as 2.7 Vdc and reduced current consumption of only 6 mA typically at 5 Vdc help make this product energy efficient.
Features:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Honeywell |
Supply Voltage | 4.5 to 24.0 Vdc |
Supply Current | 10.0mA Max. |
Output Current | 20.0mA Max. |
Operating Temperature | -40 to 105 DegreeC |
Storage Temperature | -40 - 105 DegreeC |
Model no. | SS41 |
The SS41 are small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, and are designed to respond to alternating North and South poles. A built-in regulator provides enhanced stability of operation over 4.5 Vdc to 24 Vdc supply voltage range, and internal circuitry is designed to prevent sensor damage in case the supply voltage polarity is accidentally reversed. The open-collector sinking output voltage is easily interfaced with a wide variety of electronic circuits. Low-cost digital bipolar Hall-effect sensor IC, tested at 25 °C [77 °F] and 125 °C
[257 °F]
FEATURES :
• Small, leaded, flat TO-92-style package allows for a compact PCB layout
• Wide operating voltage range of 4.5 Vdc to 24 Vdc allows these sensors to be used in a variety of applications
• Current consumption of only 5 mA max. at 4.5 Vdc for energy efficiency
• Bipolar magnetics for ring magnet applications with alternating North and South poles
• Robust design: Will operate up to 150 °C [302 °F]
• RoHS-compliant materials meet Directive 2002/95/E
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Honeywell |
Supply Voltage | 4.5 to 24.0 Vdc |
Supply Current | 10.0mA Max. |
Output Current | 20.0mA Max. |
Operating Temperature | -40 to 105 DegreeC |
Storage Temperature | -40 to 105 DegreeC |
Model no. | SS41F |
The SS41F are small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, and are designed to respond to alternating North and South poles. A built-in regulator provides enhanced stability of operation over 4.5 Vdc to 24 Vdc supply voltage range, and internal circuitry is designed to prevent sensor damage in case the supply voltage polarity is accidentally reversed. The open-collector sinking output voltage is easily interfaced with a wide variety of electronic circuits. Low-cost digital bipolar Hall-effect sensor IC, tested at 25 °C [77 °F] and 125 °C
[257 °F]
FEATURES :
• Small, leaded, flat TO-92-style package allows for a compact PCB layout
• Wide operating voltage range of 4.5 Vdc to 24 Vdc allows these sensors to be used in a variety of applications
• Current consumption of only 5 mA max. at 4.5 Vdc for energy efficiency
• Bipolar magnetics for ring magnet applications with alternating North and South poles
• Robust design: Will operate up to 150 °C [302 °F]
• RoHS-compliant materials meet Directive 2002/95/E
View Complete details