Indus Corporation

CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments and operation. When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic
These sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia (not including xenon), critical care, neonatal incubators, and general oxygen monitors.

Key Features and Benifits :

• Meets the requirements of ISO 80601-2-55
• Linear output from 0 % to 100 % O2
• 13-month warranty
• RoHS compliant

Honeywell offer ZLD Limit Switches suitable for Elevator operations. Available @ very economical prices.
Riding on unfathomable volumes of industrial expertise, we are offering an excellent range of Elevator Final Limit Switch to our clients.

We are authorised distributors of Honeywell Products and have stock of Pepperl & Fuchs ML100-8-1000-RT/102/115 Diffuse mode sensor at best prices. The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.

We are authorised distributors of Honeywell Products and have stock of Pepperl & Fuchs ML7-8-H-140-RT/59/65A/115/136 Diffuse mode sensor at best prices. The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.

CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments and operation. When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic
These sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia (not including xenon), critical care, neonatal incubators, and general oxygen monitors.

Key Features and Benifits :

• Meets the requirements of ISO 80601-2-55
• Linear output from 0 % to 100 % O2
• 13-month warranty
• RoHS compliant

Honeywell Indoor Air Quality Monitor is advanced with modular architecture design and configured with a comprehensive array of multi-sensors to measure various air quality parameters viz. Particulate Matter (PM2.5 and PM10), Carbon Dioxide (CO2), Total Volatile Organic Compound (TVOC), Temperature (T), and Relative humidity (Rh) in a single device.

The indoor air quality monitor uses an ‘active suction method’, draws ‘air sample’ which enables laminar flow across the array of sensors for better accuracy. The device is BMS Compatible via RS-485 port using MODBUS protocol.

The indoor air quality monitor is pre-configurable with optional sensors viz. Formaldehyde (HCHO), Ozone (O3)*, NOx*, and SOx* apart from the standard configuration.

It is suitable for intelligent buildings and systems, air quality data collection systems, green building evaluation systems, and ventilation systems.

 

FEATURES AND BENEFITS

• Wide array of configurable hi-accuracy sensors
• Modular architecture: ‘5+2’ for optional configuration
• Active sampling with ‘Maglev’ fan for climate and gas sensor
• Advanced Honeywell particulate sensor. laser-based light scattering particle sensing
• Large 3.5” TFT touchscreen for clear visual indication
• AQI parameter display on screen
• BMS compatible

Honeywell Y-type strainer is widely used in water application and is used for protecting valve and other equipments from scrap and impurities in the system.

FEATURES
. Ductile iron body with epoxy coating
. Stainless Steel Filter Stem

Honeywell Indoor Air Quality Monitor is advanced with modular architecture design and configured with a comprehensive array of multi-sensors to measure various air quality parameters viz. Particulate Matter (PM2.5 and PM10), Carbon Dioxide (CO2), Total Volatile Organic Compound (TVOC), Temperature (T), and Relative humidity (Rh) in a single device.

The indoor air quality monitor uses an ‘active suction method’, draws ‘air sample’ which enables laminar flow across the array of sensors for better accuracy. The device is BMS Compatible via RS-485 port using MODBUS protocol.

The indoor air quality monitor is pre-configurable with optional sensors viz. Formaldehyde (HCHO), Ozone (O3)*, NOx*, and SOx* apart from the standard configuration.

It is suitable for intelligent buildings and systems, air quality data collection systems, green building evaluation systems, and ventilation systems.

 

FEATURES AND BENEFITS

• Wide array of configurable hi-accuracy sensors
• Modular architecture: ‘5+2’ for optional configuration
• Active sampling with ‘Maglev’ fan for climate and gas sensor
• Advanced Honeywell particulate sensor. laser-based light scattering particle sensing
• Large 3.5” TFT touchscreen for clear visual indication
• AQI parameter display on screen
• BMS compatible

The room CO2 transmitter device uses a highly accurate and reliable nondispersive infrared (NDIR) sensor in an attractive, low profile enclosure for room applications to monitor CO2 levels. The sensor uses dual wavelength optics and LTA (long term adjustment) signal processing technology to deliver industry leading long-term accuracy and reliability. These technology features ensure optimum measurement stability for both periodic and constant occupancy applications, so the device is equally suitable for a classroom or a hospital room.
Standard features include a field selectable output signal of either 4-20 mA, 0-5 Vdc or 0-10 Vdc for the highest versatility, programmable CO2 measurement span, a backlit alphanumeric LCD and easy menu operation for configuration. Optional features include a resistive temperature sensor output (with LCD display of temperature in either °C or °F), 2 button setpoint adjustment, a control relay with programmable setpoint, hysteresis and time delay, and a dry-contact override switch.

The Honeywell Non Return Valve BSV4-CWD Dual Plate Check Valves is designed for Chilled & Hot Water for purpose non-return valve that is stronger, lighter in weight and smaller in size as compared to other Check valve.

 

Features

• Wide Size range (DN50…DN300)
• Cast iron Body
• Lapped Ductile Iron disc
• Wafer type and flange type Connection