Indus Corporation
Andheri, Mumbai, Maharashtra
GST No. 27AZMPM0516E1ZJ
Call 08046033631 80% Response Rate
Medical Oxygen Sensors
Honeywell E1000470 Envitec Flow Sensor Spiroquant A+
Product Brochure
| Usage/Application | Medical Ventilators |
| Brand | Envitec |
| Model Number | E1000470 |
| Model Name/Number | Flow sensor SpiroQuant H |
| Media | Oxygen |
| Material | Plastic |
| Connection Type | Gold plated 4 pin |
| Weight | Approx 10 g |
Additional Information:
- Packaging Details: 1 Box consists of 5 Nos Sensor
View Complete details
Honeywell E07-00-001 Envitec SpiroQuant H Flow Sensor
Product Brochure
| Usage/Application | Medical |
| Brand | Envitec |
| Model Name/Number | E07-00-001 Flow sensor SpiroQuant H |
| Media | Air |
| Material | Housing parts: MABS; Contact pins: gold-plated; Hot-wires: platin |
| Weight | Approx. 10 g |
| Flow Range | 0-160 slpm |
Use the advantages:
• Proven - constant temperature hot-wire anemometry • Fast response time • High product quality • RoHS conform • Biocompatible components • Short delivery times • Technical support • Made in Germany • Certified quality management system according EN ISO 13485
Additional Information:
- Delivery Time: Ready / 3-4 week
- Packaging Details: 05 Nos Box
View Complete details
OOM202 (E01-00-0047) Honeywell Envitec Medical Oxygen Sensor
Product Brochure
| Model/ Part Number | OOM202 |
| Target gases | Oxygen |
| Measuring Range | 0-100% |
| Operating Voltage | 5V |
| Usage/Application | Hospital |
| Brand | Honeywell Envitec |
| Size | Compact |
| Operating Humidity | 0-95%Rh |
| Packaging Type | 1 |
We are distributor of Honeywell Envitec Oxygen Sensor OOM202 used in ventilator & other medical industries.
Additional Information:
- Production Capacity: 5000
- Delivery Time: Ready Stock
View Complete details
Honeywell Envitec (E01-00-0020) OOM102-1 Oxygen Sensor
Minimum Order Quantity: 01 No
Product Brochure
| Brand | Honeywell Envitec |
| Model / Part Number | OOM102-1 |
| Model Number | OOM102-1 |
| Target gases | OXYGEN |
| Measuring Range | 0-100% |
| Operating Voltage | 5V |
| Oxygen Pressure Range | 2 bar |
View Complete details
OOM201 Honeywell Envitec Oxygen Sensor
Minimum Order Quantity: 01 No
Product Brochure
| Model / Part Number | OOM201 |
| Brand | Honeywell Envitec |
| Model Number | OOM201 |
| Target gases | OXYGEN |
| Measuring Range | 0-100% |
| Oxyegen pressure Range | 2 bar |
| Output Current ( in mA) | 14 mV ... 20.7 mV (Dual Cathode), load 600 Ohms |
| Warranty | 12 months |
| Dimensions | 29 mm dia |
| Usage/ Application | Medical Ventilators |
| Response Time | < 12 s to 90 % of final value |
| Modbus Output | NA |
View Complete details
Honeywell E01-00-0098 (OOM110) Envitec Oxygen Sensor
Minimum Order Quantity: 01 No
Product Brochure
| Brand | Honeywell Envitec |
| Target gases | OXYGEN |
| Model Number | E01-00-0098 (OOM110) |
| Measuring Range | 0-100% |
| Gas Flow Rate | N |
| Operating Voltage | 5V |
| Operating Oxygen Range | 0-100 |
| Oxygen Pressure Range | 2 bar |
| Diameter | 40.9 mm |
| Accuracy | Linearity error < 3 % relative |
| Warranty | 12 months,12 months |
| Material | PVC |
| Usage/ Application | Medical Ventilators |
| Application | Hospital |
| Response Time | < 12 s to 90 % of final value |
| Weight | approximately 50 grams,approximately 50 grams |
| HART Protocol | No |
View Complete details
E46-00-0021 Honeywell Envitec Oxiquant S
Product Brochure
| Brand | Honeywell Envitec |
| Model Number | Oxiquant S |
| Target gases | Oxygen |
| Operating Voltage | MV |
| Operating Oxygen Range | 0-100% |
| Oxygen Pressure Range | 750 - 1250 hPa |
| Material | PVC |
| Application | Hospital |
| Weight | 90G |
View Complete details
City Technology Mox3 Medical Sensor
Minimum Order Quantity: 1 Piece
Product Brochure
| Brand | City Technology |
| Warranty | 12 Months |
| Weight | 39 g (nominal) |
| Operating Temperature | -20 DegreeC to +50 DegreeC |
| Operating Principle | Partial pressure electrochemical |
| Output | 9 mV to 13 mV in 210 mBar O2 |
| Measurement Range | 0 mBar to 1500 mBar O2 |
| Response Time (T90) | <15 s (air to 100% O2) |
| Baseline Offset | <200 Micro Volt |
| Temperature Compensation | <2% O2 equivalent (0 DegreeC to 40 DegreeC) |
| External Load Resistor | 10 k Ohm minimum |
| Connector | 3-pin Molex Header |
| Housing Material | White ABS |
| Operating Pressure Range | 0.5 Bar to 2.0 Bar |
| Operating Humidity Range | 0% to 99% RH noncondensing |
| Long-Term Ouput Drift in 100% O2 | < 5% signal loss/year |
| Recommended Storage Temperature | -10 DegreeC to +40 DegreeC |
CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments and operation. When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic
These sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia (not including xenon), critical care, neonatal incubators, and general oxygen monitors.
Key Features and Benifits :
- Meets the requirements of ISO 80601-2-55
- Linear output from 0 % to 100 % O2
- 13-month warranty
- RoHS compliant
View Complete details
Honeywell City Technology AO2 Citicel Oxygen Sensor
Product Brochure
| Target gases | oxygen |
| Model Name/Number | AO2 |
| Measuring Range | 0-100% O2 |
| Material | Red ABS |
| Operating Voltage | 5V |
| Usage/Application | Hospital |
| Brand | City Technology (Honeywell) |
| Color | Red |
| Size | Compact |
| Operating Humidity | 0-95%Rh |
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: 01 No
View Complete details
Honeywell AA428-210 (AO2) Oxygen Sensor
Minimum Order Quantity: 1 Piece
Product Brochure
| Target gases | Oxygen |
| Measuring Range | 0-100% |
| Response Time | <5 s |
| Weight | 40 g |
| Features | Molex Connector & Linear Output from 0-100% Oxygen |
| Housing | Red ABS |
View Complete details
Honeywell Envitec AlcoQuant Breath Alcohol Analyzer
Minimum Order Quantity: 1 Piece
Product Brochure
| Usage/Application | Law Enforcement Agencies |
| Brand | AlcoQuant |
| Measurement Range | 0 to 5.5 BAC* |
| Features | PIN-protected, Flow test mode, Quick updates via USB |
| Display | LCD Display |
| Mouthpiece | Single-use EnviteC mouthpiece (Types S and D) |
| Temperature Range | -5 DegreeC to 45 DegreeC |
| Dimensions | 195 mm x 60 mm x 47 mm |
View Complete details
Honeywell GD250W4E CO Gas Detector
Product Brochure
| Model | GD250W4E |
| Brand | Honeywell |
| Accuracy | 1) +-5% FS @25C. 50% RH for0~150ppm 2) +- 10% FS @25C. 50%RH for 150~250ppm |
| Response Time | Within 5 min. |
| Sensor Type | Semiconductor |
| Operating Temperature | -10 ~ 50 C. |
| Gas Detected | Carbon monoxide (CO) |
| Sensing Range | 0 ~ 250 ppm |
| Wiring | 4 wire |
| Detect range | 0~250ppm |
| Warm-up time | Minimum 2 hours |
| Power supply | 24Vac, 24Vdc |
| Output signal | 2~10Vdc or 4~20mA |
| Operating Humidity | 10 ~ 95%RH (no condensing) |
| Storage temperature | -10 ~ 60 C |
| Storage Humidity | 10 ~ 95%RH (no condensing) |
FEATURES
- High sensitivity and selectivity to carbon monoxide
- Low sensitivity to alcohol vapor
- Solid state sensor
- Linear 2 to 10 Vdc or 4 to 20mA output
- Compact size (70 122 32
APPLICATION
GD250W3E/4E is IAQ(Indoor Air Quality) sensor, which has been designed to detect carbon monoxide gas in the air. This model has high accuracy at low concentration, so it optimum for parking lot, tunnel and under ground places. Also, the advantage of this model is compact size and easy installation.
View Complete details
My Sign O Oxygen Monitor Honeywell Envitec
Minimum Order Quantity: 1 Piece
Product Brochure
| Brand | Honeywell |
| Display | 0.1% oxygen resolution |
| Measuring range | 0 - 100% Oxygen |
| Accuracy | < 1% volume O2 , when calibrated at 100% vol. O2 |
| Response time | < 12 seconds to 90% of final value |
| Ambient pressure | 750 to 1250 hPa |
| Operating temperature | 0-50 deg C |
| Battery Type | Li-ion 3.6 V 2900 mAh |
| Weight | 330 g |
| Dimensions (device) | 160 mm (H) x 72 mm (W) x 39 mm (D) |
| Protection class | IP54 |
View Complete details
EXPLORE MORE CATEGORIES