Indus Corporation

The Honeywell HPM Series Particulate Matter Sensor is a laser-based sensor which detects and counts particles using light scattering. The detection concentration range is 0 µg/m3 to 1,000 µg/m3. A laser light source illuminates a particle as it is pulled through the detection chamber. As particles pass through the laser beam, the light reflects off the particles and is recorded on the photo or light detector. The light is then analyzed and converted to an electrical signal to calculate particle concentration. The Honeywell particle sensor provides information on the particle concentration for given particle concentration range.

The Honeywell HPM Series Particulate Matter Sensor is a laser-based sensor which detects and counts particles using light scattering. The detection concentration range is 0 µg/m3 to 1,000 µg/m3. A laser light source illuminates a particle as it is pulled through the detection chamber. As particles pass through the laser beam, the light reflects off the particles and is recorded on the photo or light detector. The light is then analyzed and converted to an electrical signal to calculate particle concentration. The Honeywell particle sensor provides information on the particle concentration for given particle concentration range. 

The Honeywell TR50 IAQ Sensor is an advanced, configurable device for commercial buildings. This sensor monitors: • Temperature (T) • Relative Humidity (RH) • Carbon Dioxide (CO2) • Particulate Matter (PM1.0, PM2.5, PM10) • Total Volatile Organic Compound (TVOC) Flexible building automation system integration via BACnet MS/TP, Modbus, SylkTM Bus(coming soon) protocols. Customizable display and sensor thresholds with stable long-term accuracy for minimal maintenance or recalibration.

HAQ61L-NL Honeywell Air Quality Sensor

Honeywell HAQ61 series room air quality sensor is an integrated air sensor which can simultaneously detect five air
parameters: air Temperature & Relative humidity, CO2 concentration, PM2.5 concentration and formaldehyde (HCHO)
concentration, and calculate and display the concentration
of Total Volatile Organic Compound (TVOC).

Honeywell Indoor Air Quality Monitor is advanced with modular architecture design and configured with a comprehensive array of multi-sensors to measure various air quality parameters viz. Particulate Matter (PM2.5 and PM10), Carbon Dioxide (CO2), Total Volatile Organic Compound (TVOC), Temperature (T), and Relative humidity (Rh) in a single device.

The indoor air quality monitor uses an ‘active suction method’, draws ‘air sample’ which enables laminar flow across the array of sensors for better accuracy. The device is BMS Compatible via RS-485 port using MODBUS protocol.

The indoor air quality monitor is pre-configurable with optional sensors viz. Formaldehyde (HCHO), Ozone (O3)*, NOx*, and SOx* apart from the standard configuration.

It is suitable for intelligent buildings and systems, air quality data collection systems, green building evaluation systems, and ventilation systems.

 

FEATURES AND BENEFITS

• Wide array of configurable hi-accuracy sensors
• Modular architecture: ‘5+2’ for optional configuration
• Active sampling with ‘Maglev’ fan for climate and gas sensor
• Advanced Honeywell particulate sensor. laser-based light scattering particle sensing
• Large 3.5” TFT touchscreen for clear visual indication
• AQI parameter display on screen
• BMS compatible

Honeywell Indoor Air Quality Monitor is advanced with modular architecture design and configured with a comprehensive array of multi-sensors to measure various air quality parameters viz. Particulate Matter (PM2.5 and PM10), Carbon Dioxide (CO2), Total Volatile Organic Compound (TVOC), Temperature (T), and Relative humidity (Rh) in a single device.

The indoor air quality monitor uses an ‘active suction method’, draws ‘air sample’ which enables laminar flow across the array of sensors for better accuracy. The device is BMS Compatible via RS-485 port using MODBUS protocol.

The indoor air quality monitor is pre-configurable with optional sensors viz. Formaldehyde (HCHO), Ozone (O3)*, NOx*, and SOx* apart from the standard configuration.

It is suitable for intelligent buildings and systems, air quality data collection systems, green building evaluation systems, and ventilation systems.

 

FEATURES AND BENEFITS

• Wide array of configurable hi-accuracy sensors
• Modular architecture: ‘5+2’ for optional configuration
• Active sampling with ‘Maglev’ fan for climate and gas sensor
• Advanced Honeywell particulate sensor. laser-based light scattering particle sensing
• Large 3.5” TFT touchscreen for clear visual indication
• AQI parameter display on screen
• BMS compatible

FEATURES
• Laser-based light scattering particle sensing Concentration range: 0 g/m3 to 1,000 g/m3
• Air inlet & outlet on same side
• Fully calibrated
• Metal casting
• 4 channel direct output to measure PM 1.0, PM 2.5, PM 4.0 & PM 10
• Multiple digital outputs though UART, 12C, & PWM

• Proven EMC performance, and superior accuracy of ±15%-20% for all PM values
• Lowest current consumption of 50 mA
• Self calibration technology to overcome sensor drift incase of dust accumulation
• Ultra sleek design with dimensions of 49 x 31.5 x 10.8 mm

 

POTENTIAL APPLICATIONS
• HVAC (Commercial & Residential)
• Indoor air quality monitors
• Handheld air quality monitors
• Air purifiers (Commercial & Residential)
• Automotive cabin air purifiers

The Honeywell HPM Series Particulate Matter Sensor is a laser-based sensor which detects and counts particles using light scattering. The detection concentration range is 0 µg/m3 to 1,000 µg/m3. A laser light source illuminates a particle as it is pulled through the detection chamber. As particles pass through the laser beam, the light reflects off the particles and is recorded on the photo or light detector. The light is then analyzed and converted to an electrical signal to calculate particle concentration. The Honeywell particle sensor provides information on the particle concentration for given particle concentration range. 

The purpose of this document is to present the performance specification of the T3NDH transmitter. This document should be used in conjunction with Operating Principles (OP12) and the Product Safety Datasheet (PSDS 5).